Towel Shelf w/Towel Bar 20" Bright
Surface Mounted Towel Shelf with Drying Rod shall be fabricated of stainless steel alloy 18-8, type 304. Wall mounting plates shall be formed for strength with dimpled mounting holes. Cross tubes shall be 3/8" diameter (10mm) and shall be held in receiver holes in continuous 3/4" diameter (19mm) formed mounting frame mechanically retained in wall plates. Drying rod below shelf shall be 3/4" diameter.
Under normal usage, stainless steel products require regular cleaning with a soft clean rag moistened with a mild detergent followed by a water moistened clean rag and then a dry rag, much the same as stainless steel sinks, pot & pans and eating utensils, and can be wiped with lemon oil applied by soft polishing cloth to maintain sheen.
The 9343 #4 satin finished stainless steel should be protected against Muriatic acid and caustic or abrasive materials, and harsh cleaning detergents [with pH outside the range 6 ± .5]. In the event such agents cause discoloration, polish with a stainless steel cleaner such as 3M Stainless Steel Cleaner & Polish and a 3M Scotch Brite pad. Either a blue (less aggressive) or green (more aggressive) pad is recommended.
This document was last modified on: