Grab Bars Bradley
BC-8120-010000 1-1/2" X 30" X 33" Wall to Floor Grab Bar with Outrigger
1-1/2" O.D. heavy duty stainless steel grab bar with concealed mounting. 8120-"010" Series is a Wall to Floor grab bar with Outrigger.
FLANGES: 3-1/8" dia. 13 gauge stainless steel.
ESCUTCHEONS: 22 gauge stainless steel. One-piece drawn construction with exposed surfaces in architectural satin finish. Snap over flanges to conceal mounting screws.
TUBING: 1-1/2" O.D. 18 gauge stainless steel, seamless construction with exposed surfaces in architectural satin finish.
Downloads Specification Sheet for BC-8120-010000
Stainless Steel Cleaning and Maintenance:
Stainless steels are very resistant to rust, however this does not mean that they are impervious to it. Stainless steel must be kept clean and free from contaminants. Frequent cleaning with mild soap and water or glass cleaner and a cotton cloth is required. Sometimes stainless steel products will develop corrosion or discoloration due to environmental and installation conditions. The following is a list of common conditions that cause corrosion or discoloration of stainless steel and should be avoided:
Any discoloration or corrosion should be removed as soon as possible, or permanent discoloration and pitting of the surface could occur. Usually, the product can be restored to its original condition. Most discoloration can be removed with a mild cleanser (Ajax, Bon Ami, etc.) or stainless steel cleaner (Revere Ware Stainless Steel Cleaner, Goddard's Stainless Steel Cleaner, etc.) and a Scotchbrite pad. The surface should then be thoroughly rinsed with clear water. With proper maintenance, stainless steel will maintain its luster and appearance indefinitely.