Flat Rate Ground Shipping $9.95 Per Order! Call us at: 1-800-440-5556
Air Delights Commercial Restroom Products

Grab Bars Bradley

BC-8120-003480 1-1/2" x 48" Grab Bar with Center post One End Return

BC-8120-003480 1-1/2" x 48" Grab Bar with Center post One End Return

Bradley 8120-003480 Grab Bar 1-1/2" OD x 48 Inch Straight Grab Bar with Center-post, Only One End Return, Stainless Steel Finish, Grab Bar for Restrooms.

FLANGES: 3-1/8" dia. 13 gauge stainless steel.

ESCUTCHEONS: 22 gauge stainless steel. One-piece drawn construction with exposed surfaces in architectural satin finish. Snap over flanges to conceal mounting screws.

TUBING: 1-1/2" O.D. 18 gauge stainless steel, seamless construction with exposed surfaces in architectural satin finish. Bent ends of tubing pass thru the flanges and are welded for maximum strength.

SKU Product Description Price QTY
BC-8120-003480 BC-8120-003480 1-1/2" x 48" Grab Bar with Center post One End Return $64.80
SKU Product Name Price QTY
BC-8120-003520 BC-8120-003520 Grab Bar 1-1/2" OD X 52 with Center post One End Return $67.50
BC-8120-003540 BC-8120-003540 Grab Bar 1-1/2" OD X 54 with Center post One End Return $69.30

More Info

Stainless Steel Cleaning and Maintenance:
Stainless steel is a low-carbon steel that contains at least 10 percent chromium. The addition of chromium gives the steel its unique corrosion-resisting properties. Most Bradley accessories are fabricated from type 304 stainless steel, which contains 18 percent chromium and 8 percent nickel. Bradley uses it because it is extremely durable, resists corrosion, stands up to many chemicals, and is easy to fabricate.

Stainless steels are very resistant to rust, however this does not mean that they are impervious to it. Stainless steel must be kept clean and free from contaminants. Frequent cleaning with mild soap and water or glass cleaner and a cotton cloth is required. Sometimes stainless steel products will develop corrosion or discoloration due to environmental and installation conditions. The following is a list of common conditions that cause corrosion or discoloration of stainless steel and should be avoided:

  • Chloride containing cleansers - this includes bleach and any bleach containing cleanersMuriatic acid (hydrochloric acid) - commonly used to clean up after tile/concrete installation
  • Concentrated soap residue - chemical additives will cause discoloration and some dried soaps actually look like rust
  • Water with high iron content - can leave a rusty residue, especially if allowed to drip continuously
  • Contact with iron materials - including steel wool, machining chips, and iron residue/dust from installation or cleaning of other steel products
  • Trapped moisture between the product and another object - rubber mats, metal cans of soaps or cleaners
  • Salts - contain chlorides

Any discoloration or corrosion should be removed as soon as possible, or permanent discoloration and pitting of the surface could occur. Usually, the product can be restored to its original condition. Most discoloration can be removed with a mild cleanser (Ajax, Bon Ami, etc.) or stainless steel cleaner (Revere Ware Stainless Steel Cleaner, Goddard's Stainless Steel Cleaner, etc.) and a Scotchbrite pad. The surface should then be thoroughly rinsed with clear water. With proper maintenance, stainless steel will maintain its luster and appearance indefinitely.


Reviews

Be the first to write a review for this product!