Login / Register Cart (0)
Customer Reviews
BC-740-1830

BC-740-1830 18" x 30" Fixed Tilt Mirror - Stainless Steel

$279.82 / each

BC-740-1830 18" x 30" Fixed Tilt Mirror - Stainless Steel

Bradley Restroom Accessory BC-740-1830

BC-740-1830 18" x 30" Fixed Tilt Mirror - Stainless Steel

Fixed tilt mirror framed with 20 gauge stainless steel with 20 gauge concealed stiffeners. Welded corners polished to a uniform satin finish. Mirror is of first quality 1/4" float glass.

  • Fixed tilt mirror
  • Satin finish stainless steel frame
  • Standard 6 degree angle to wall
  • Welded corners

$279.82

BC-740-1830

Total: $279.82

Oversized Shipping Charges May Apply



Secure transaction


Material Safety Data Sheets (MSDS)

More Info

Mirror Maintenance:
Bradley mirrors are fabricated from type 430 stainless steel frames and plate glass or an alternative reflective surface. The frame can be cared for by following the general stainless steel maintenance instructions above (be careful not to scratch the highly polished frames). Reflective surfaces can be cleaned with any standard non-abrasive glass cleaner (Windex, Sparkle, etc.) and a soft cloth. Care must be taken to avoid allowing the cleaner to run down the surface of the mirror and collect in the frame. If allowed to continue, this could lead to silver spoilage and would void the warranty on the glass.

Stainless Steel Cleaning and Maintenance:
Stainless steel is a low-carbon steel that contains at least 10 percent chromium. The addition of chromium gives the steel its unique corrosion-resisting properties. Most Bradley accessories are fabricated from type 304 stainless steel, which contains 18 percent chromium and 8 percent nickel. Bradley uses it because it is extremely durable, resists corrosion, stands up to many chemicals, and is easy to fabricate.

Stainless steels are very resistant to rust, however this does not mean that they are impervious to it. Stainless steel must be kept clean and free from contaminants. Frequent cleaning with mild soap and water or glass cleaner and a cotton cloth is required. Sometimes stainless steel products will develop corrosion or discoloration due to environmental and installation conditions. The following is a list of common conditions that cause corrosion or discoloration of stainless steel and should be avoided:

  • Chloride containing cleansers - this includes bleach and any bleach containing cleanersMuriatic acid (hydrochloric acid) - commonly used to clean up after tile/concrete installation
  • Concentrated soap residue - chemical additives will cause discoloration and some dried soaps actually look like rust
  • Water with high iron content - can leave a rusty residue, especially if allowed to drip continuously
  • Contact with iron materials - including steel wool, machining chips, and iron residue/dust from installation or cleaning of other steel products
  • Trapped moisture between the product and another object - rubber mats, metal cans of soaps or cleaners
  • Salts - contain chlorides

Any discoloration or corrosion should be removed as soon as possible, or permanent discoloration and pitting of the surface could occur. Usually, the product can be restored to its original condition. Most discoloration can be removed with a mild cleanser (Ajax, Bon Ami, etc.) or stainless steel cleaner (Revere Ware Stainless Steel Cleaner, Goddard's Stainless Steel Cleaner, etc.) and a Scotchbrite pad. The surface should then be thoroughly rinsed with clear water. With proper maintenance, stainless steel will maintain its luster and appearance indefinitely.

Reviews

Sign Up   for the Air Delights Newsletter

© 1991-2024 • Air Delights, Inc. All rights reserved. "Air Delights" and logo are registered trademarks for Air Delights, Inc.