Grab Bars Bobrick

18 x 1-1/2 inch Stainless Steel Grab Bar

The Bobrick model B-6806 Series is a grab bar constructed of stainless steel with a satin finish. The bar passes through the flange and is welded to form a single structural unit. The cover then snaps over the mounting flange to conceal screws. This unit provides 1-1/2" clearance from the wall and when properly installed can support loads in excess of 900 lbs This unit meets ADA Accessibility Guidelines in the U.S.

Downloads

B-6806 Series Specifications

❮ Return to previous page

Stainless Steel Cleaning and Maintenance

Always: Wipe or polish with the grain direction of satin finishes. Remove any cleaning or soap residue from stainless surface with water and wipe dry with clean cloth.
Caution: Avoid cleaning products containing bleach, hydrochloric acids and or chlorides . . . these are frequently found in toilet bowl or tile cleaners and in abrasive scrubbing powders. Avoid use of steel wool which can leave behind fine particles that cause surface rust. Avoid use of abrasive cleaners on bright polish stainless steel surfaces.

Reviews

Be the first to write a review for this product!