Login / Register Cart (0)
Customer Reviews

30 x 1-1/4 Stainless Steel Grab Bar - Peened Finish

$51.71 / each

Image Not Available

Grab Bars B-5806.99-30

30 x 1-1/4 Stainless Steel Grab Bar - Peened Finish

The Bobrick model 5806 Series grab bar is constructed of stainless steel with satin finish. The bar passes through the flange and is welded to form a single structural unit. The cover then snaps over the mounting flange to conceal the screws. This unit provides 1-1/2 inch clearance from the wall and, when properly installed can support loads in excess of 900 lbs. This unit meets ADA Accessibility Guidelines in the U.S.



Total: $51.71

Secure transaction

Material Safety Data Sheets (MSDS)

More Info

Stainless Steel Cleaning and Maintenance

  • Always: Wipe or polish with the grain direction of satin finishes. Remove any cleaning or soap residue from stainless surface with water and wipe dry with clean cloth.
  • Caution: Avoid cleaning products containing bleach, hydrochloric acids and or chlorides . . . these are frequently found in toilet bowl or tile cleaners and in abrasive scrubbing powders. Avoid use of steel wool which can leave behind fine particles that cause surface rust. Avoid use of abrasive cleaners on bright polish stainless steel surfaces.


Sign Up   for the Air Delights Newsletter

© 1991-2023 • Air Delights, Inc. All rights reserved. "Air Delights" and logo are registered trademarks for Air Delights, Inc.