Login / Register Cart (0)
Customer Reviews

Toilet Paper Holder - Square - Chase

$143.18 / each

Toilet Paper Holder - Square - Chase

American Specialties, Inc. ASI-110-1

Toilet Paper Holder - Square - Chase

Recessed Toilet Paper Holder, with square bezel, for chase mounting shall hold one (1) standard toilet paper roll and shall be fabricated of alloy 18-8 stainless steel, type 304, 14 gauge. Beveled trim shall have No 4 satin finish. Interior shall have glass blasted satin matte finish. Back mounting plate shall be fabricated of 11 gauge die-formed galvanized steel.

Hardware mounting kit (supplied) shall include two (2) 3" (76mm) long 1/4-20 threaded rods with four (4) washers and nuts and two (2) 1/4- - 20 x 3/4" (19mm) bolts (supplied) to hold back mounting plate in place.



Total: $143.18

Secure transaction

Material Safety Data Sheets (MSDS)

More Info

    Stainless Steel Cleaning and Maintenance

    Under normal usage, stainless steel products require regular cleaning with a soft clean rag moistened with a mild detergent followed by a water moistened clean rag and then a dry rag, much the same as stainless steel sinks, pot & pans and eating utensils, and can be wiped with lemon oil applied by soft polishing cloth to maintain sheen.

    Satin finished stainless steel should be protected against Muriatic acid and caustic or abrasive materials, and harsh cleaning detergents [with pH outside the range 6 ± .5]. In the event such agents cause discoloration, polish with a stainless steel cleaner such as 3M Stainless Steel Cleaner & Polish and a 3M Scotch Brite pad. Either a blue (less aggressive) or green (more aggressive) pad is recommended.


Sign Up   for the Air Delights Newsletter

© 1991-2024 • Air Delights, Inc. All rights reserved. "Air Delights" and logo are registered trademarks for Air Delights, Inc.