XLerator, The Fast Hand Dryer

Click here for Specification Sheet

Call for Quantity Discounts!

The XLERATOR Hand Dryer completely dries hands in 10 to 15 seconds. By eliminating residual moisture, the hands are warm and comfortable after drying. This new technology rapidly dries hands in two sequential phases. In the first phase, loose water droplets are blown from the hands with a strong, controlled air blast. In the second phase, residual moisture is evaporated and the hands are warmed by an air stream heated up to 135 degrees F (55 degrees C). Refer to Excel Dryer product literature for detailed descriptions and verifying test reports. Not only does the XLERATOR Hand Dryer dry hands in one third the time required by conventional dyers, the unit runs on 15 amp service. The combination of these two factors results in an 80 percent energy savings compared to conventional hand dryer use.

Specifications:

• Dries Hands completely in 10 to 15 Seconds
• Uses 80% Less Energy
• 90% Cost Savings vs. Paper Towels
• GREENSPEC™ Approved
• Source Reduction Alternative
• Promotes Hygiene
• Available in 110/120, 220/240, 208, and 277 Volts

Model XL-BW
Surface-Mounted 
Automatic Hand Dryer with White Plastic Cover

Model XL-W
Surface-Mounted 
Automatic Hand Dryer White Epoxy Painted Metal Cover

Model XL-GR
Surface-Mounted 
Automatic Hand Dryer Graphite Textured Painted Metal Cover

Model XL-C
Surface-Mounted 
Automatic Hand Dryer Chrome Plated Metal Cover

Model XL-SB
Surface-Mounted 
Automatic Hand Dryer Brushed Stainless Steel Cover

Dimensions: 
11 3/4" LG. X 12 11/16" HIGH X 6 11/16" DEEP
(298 MM LG. X 322 MM HIGH X 170 MM DEEP)
Weight:16 LBS. (7.3 KGS.)

Available Voltages:
110/120
220/240
208
277 

Click here for Specification Sheet