Flat Rate Ground Shipping $9.95 Per Order! Call us at: 1-800-440-5556
Air Delights Commercial Restroom Products
Sloan Flushmate Repair Parts
Automatic Metered Air Fresheners
Commercial Restroom Bathroom Entrance Signs
Credit Application

Instant-Flow Tankless Hot Water Heaters

Tankless Water Heaters Explained

Chronomite: Patented Microprocessor Technology

The element assembly houses a series of ingeniously designed coils that instantly heat water as it flows through the vessel. A unique power switch automatically applies electrical current to the coils when hot water is requested. The electrical current is not applied when water is not in use. The microprocessor can be preset at the factory to maintain a constant output temperature, even at varying flow rates of the unit.

Typical Remote Lavatory Installation

Costly Conventional Method

Costly conventional hot water heater installation

Economical Instant-Flow Way

Economical CHRONOMITE INSTANT-FLOW way

At the size of a standard dictionary, Chronomite tankless water heaters are well hidden for aesthetic appeal, and easily placed within a specially designed compartment underneath wash systems and hand basins. Using only a cold water line and electrical hookup, installation costs are minimal, and there is no need for a costly piping/valving associated with conventional water heaters.

Provide Point-of-Use Hot Water in Just 15 Minutes

10 Steps to installing your Chronomite Hot Water Heater in approximately 15 minutes
  1. Before beginning, turn off the breaker and disconnect the electrical supply to the area. Shut off water supply to the fixture. Double check that everything has been turned off prior to proceeding.
  2. Access electrical connections within by unscrewing and removing the front face plate on the Chronomite unit. Set aside screw in a safe place.
  3. Mount Chronomite unit in desired location using heavy-duty metal screws, making sure to pull existing electrical wires through supplied hole in the back of the heater unit. Each corner of the unit has a mounting bracket.
  4. Connect electrical supply wires to the electrical connections from the unit, making sure to tighten all connections securely.
  5. Close the front face-plate and screw securely closed.
  6. Connect the Cold Water supply line from the water source to the bottom Cold/Hot inlet compression fitting opening on the Chronomite unit. Chronomite Tankless Water Heaters require only one cold water intake, eliminating the need for excess lines.
  7. Connect the Hot Water supply line from the top Cold/Hot inlet compression fitting opening on the Chronomite unit to the sink.
  8. Reopen water supply line to the unit and turn on sink for 2 to 3 minutes to purge air from the lines
    (Note: water will not run at temperature until the breaker is turned back on in step #10).
  9. Screw your Flow Control Valve (supplied) onto your faucet/fixture head.
  10. Once purged, turn on your breaker and enjoy your new Chronomite Tankless Electric Water Heater at temperature.

SOURCE: Chronomite.com
DISCLAIMER: Air Delights would like to remind you that working with electricity and water can be a dangerous combination. Please consult or hire a professional electrician before installing.