Bobrick Stainless Steel Grab Bars

Bobrick Grab Bars
Grab bars that provide 1-1/2" clearance from the wall can support loads in excess of 900 pounds when properly installed. 

Meets ADA Accessibility Guidelines in U.S.A.

• Satin-finish 18-gauge type 304 stainless steel tubing 1-1/4" and 1-1/2" diameters. 
• Bar passes through flange and is heliarc welded to form single structural unit. 
• Cover snaps over mounting flange to conceal screws.
• Concealed mounting flange 1/8" (3mm) thick stainless steel plate, 2" W x 3-1/8" H (50 x 80mm), with two screw holes for concealed anchors. 
• Cover is 22-gauge (0.8mm) stainless steel with satin-finish, 3-1/4" (85mm) dia. 
• Grab bars that provide 1-1/2" (38mm) clearance from the wall can support loads in excess of 900 pounds (408-kg) when properly installed. 
• Meets ADA Accessibility Guidelines in U.S.A. 
• All joints and supports are contour cut and welded. 
• Concealed anchors and fasteners available as an optional accessory. 
• Peened nonslip gripping surface available.