Flat Rate Ground Shipping $9.95 Per Order! Call us at: 1-800-440-5556
Air Delights Commercial Restroom Products
Sloan Flushmate Repair Parts
Automatic Metered Air Fresheners
Commercial Restroom Bathroom Entrance Signs
Credit Application

Bradley 747 Frameless Mirrors

BC-747F-018300S 18 inches wide by 30 inches high-Solid Border

Frameless mirror shall be of first quality 1/4" float glass. Edges ground and polished smooth.

  • S - Solid acid-etched border
  • P - Plaid acid-etched border

SKU Description Price Qty
BC-747F-018300S BC-747F-018300S 18 inches wide by 30 inches high-Solid Border $125.45
BC-747F-018360S BC-747F-018360S 18 inches wide by 36 inches high-Solid Border $153.69
BC-747F-024360S BC-747F-024360S 24 inches wide by 36 inches high-Solid Border $187.75
BC-747F-018300P BC-747F-018300P 18 inches wide by 30 inches high-Plaid Border $125.45
BC-747F-018360P BC-747F-018360P 18 inches wide by 36 inches high-Plaid Border $153.69
BC-747F-024360P BC-747F-024360P 24 inches wide by 36 inches high-Plaid Border $187.75

More Info

Mirror Maintenance: Bradley mirrors are fabricated from type 430 stainless steel frames and plate glass or an alternative reflective surface. The frame can be cared for by following the general stainless steel maintenance instructions above (be careful not to scratch the highly polished frames). Reflective surfaces can be cleaned with any standard non-abrasive glass cleaner (Windex, Sparkle, etc.) and a soft cloth. Care must be taken to avoid allowing the cleaner to run down the surface of the mirror and collect in the frame. If allowed to continue, this could lead to silver spoilage and would void the warranty on the glass.

Stainless Steel Cleaning and Maintenance: Stainless steel is a low-carbon steel that contains at least 10 percent chromium. The addition of chromium gives the steel its unique corrosion-resisting properties. Most Bradley accessories are fabricated from type 304 stainless steel, which contains 18 percent chromium and 8 percent nickel. Bradley uses it because it is extremely durable, resists corrosion, stands up to many chemicals, and is easy to fabricate. Stainless steels are very resistant to rust, however this does not mean that they are impervious to it. Stainless steel must be kept clean and free from contaminants. Frequent cleaning with mild soap and water or glass cleaner and a cotton cloth is required. Sometimes stainless steel products will develop corrosion or discoloration due to environmental and installation conditions. The following is a list of common conditions that cause corrosion or discoloration of stainless steel and should be avoided:

  • Chloride containing cleansers - this includes bleach and any bleach containing cleanersMuriatic acid (hydrochloric acid) - commonly used to clean up after tile/concrete installation
  • Concentrated soap residue - chemical additives will cause discoloration and some dried soaps actually look like rust
  • Water with high iron content - can leave a rusty residue, especially if allowed to drip continuously
  • Contact with iron materials - including steel wool, machining chips, and iron residue/dust from installation or cleaning of other steel products
  • Trapped moisture between the product and another object - rubber mats, metal cans of soaps or cleaners
  • Salts - contain chlorides

Any discoloration or corrosion should be removed as soon as possible, or permanent discoloration and pitting of the surface could occur. Usually, the product can be restored to its original condition. Most discoloration can be removed with a mild cleanser (Ajax, Bon Ami, etc.) or stainless steel cleaner (Revere Ware Stainless Steel Cleaner, Goddard's Stainless Steel Cleaner, etc.) and a Scotchbrite pad. The surface should then be thoroughly rinsed with clear water. With proper maintenance, stainless steel will maintain its luster and appearance indefinitely.