Login / Register Cart (0)
Customer Reviews
B-3992

Modular Waste Drain, 3-1/2" Sink Opening, 2" NPT Male / 1-1/2" Female Outlet

$355.60 / each

In Stock

Modular Waste Drain, 3-1/2" Sink Opening, 2" NPT Male / 1-1/2" Female Outlet

T&S Brass B-3992

Modular Waste Drain, 3-1/2" Sink Opening, 2" NPT Male / 1-1/2" Female Outlet

Modular push-pull waste valve for 3-1/2" sink opening with stainless steel body, 2" NPT male or 1-1/2" NPT female outlet, push-pull handle with chrome plated metal handle guard, 3-1/2" snap-in removable strainer and overflow outlet with cap. Certified to ASME

  • Discharge Rate: 28.50 GPM max (107.88 L/min)

$355.60

B-3992

In Stock

Total: $355.60



Secure transaction


Material Safety Data Sheets (MSDS)

More Info

Features & Benefits

  • Modular push-pull waste valve for 3-1/2" sink opening w/ stainless steel body
  • Modular design for easy installation and maintenance
  • 2" NPT male outlet / 1-1/2" NPT female outlet
  • Push-pull handle with handle guard to endure extreme abuse
  • 3-1/2" snap-in removable strainer
  • Overflow outlet w/ cap & sealing washer
  • Installation tool included
  • Handle extension kits available
  • Material: Stainless steel body, stainless steel flat strainer and chrome plated metal handle guard

T&S Brass (B-3992) Modular Waste Drain, 3-1/2in Sink Opening, 2in NPT Male / 1-1/2in Female Outlet additional product graphic

T&S Brass (B-3992) Modular Waste Drain, 3-1/2in Sink Opening, 2in NPT Male / 1-1/2in Female Outlet additional product graphic
B-3992

01

3-1/2" Removeable Snap-in Strainer SKU: 010386-45

02

Vandal-resistant Stainless Steel Screw SKU: 016654-45

03

3-1/2" Face Flange SKU: 010384-45

04

3-1/2" Vandal-resistant Drain Guard SKU: 017694-45

05

3-1/2" Face Flange Gasket SKU: 010382-45

06

Valve Body Assembly
w/ 2 Seals
SKU: 017219-45

07

Valve Body Seal Kit (2/pkg) SKU: 017698-45K

08

#10 Split Lock Washer SKU: 018196-45

09

10-32 x 1-1/8" Socket Head Cap Screw (SHCS) SKU: 017669-45

10

Coupling Nut for Twist Drain SKU: 010391-45

11

Coupling Nut Ferrule SKU: 010390-45

12

1/4"-20 x 1-1/4" Stainless Steel Socket Head Cap Screw (SHCS) SKU: 017454-45

13

Support Rod SKU: 017451-20

14

Handle SKU: 017448-45

15

Waste Drain Installation Tool SKU: 017670-45

Modular Waste Drain Installation Instructions

Introduction

The Series B-3990 Modular Waste Drains are designed to fit sinks with a 3-1/2" drain opening. Versions with and without overflow tubes and various outlets adapters are available.

Series B-3990 Waste Drains operate by a push/pull motion of the handle to close and open the drain.

Features

  • Low maintenance gate valve assembly
  • Clear 2" diameter drain passage for fast draining and easy clog removal from sink
  • Easy maintenance and replacement of service parts with out removal from sink
  • Handle guard assembly for exposed applications for protection against damage from mop buckets, push carts, etc.
  • Modular design for cofigurability and serviceability
  • Optional handle length extensions available
  • Vandal resistant drain guard provided to keep unsafe or unintended objects out of the drain passage
  • Multi-purpose sink flange tool provided for easy installation

T&S Brass (B-3992) Modular Waste Drain, 3-1/2in Sink Opening, 2in NPT Male / 1-1/2in Female Outlet additional product graphic

Installation

1. Remove the Snap-in Strainer and unscrew the Sink Flange Assembly from the Waste Drain Assembly. Apply a bead of Plumber’s Putty to the bottom of the Sink Flange Assembly where it contacts the sink bowl. (Keep the Drain Guard installed in the Sink Flange Assembly at all times. Remove it only when clog maintenance is needed and install it again when finished)

2. Make sure the underside and inside mating surfaces of the sink bowl in the area of the drain are clean.

3. Install the Waste Drain Assembly and Gasket from below the sink.

4. Install the Sink Flange Assembly thru the sink drain opening and screw it into the Waste Drain Assembly below.

5. Before tightening, position the waste drain Handle to the desired location. Tighten the Sink Flange Assembly securely with the Sink Flange Tool provided. (Figure 2)

(cont'd)

6. If Overflow is used (Figure 3) -- Install the Overflow Head in the sink. The modular design of the waste drain allows the overflow port on the Outlet to be positioned Left, Right or Back. To change positions, remove the (4) cap screws with a 5/32" hex key wrench and rotate the Outlet to the desired position. If the Outlet has been removed, ensure the Valve Seal is either in the Valve Body correctly or installed on the Outlet lip correctly. Install the (4) cap screws and tighten. Measure and cut the overflow tube to fit into the Overflow Head and Overflow Port on the waste drain Outlet. Install the Coupling Nuts and Seals on the overflow tube. Install the overflow tube and tighten the connections.

7. Connect the drain line to the waste drain Outlet. If Outlet Adapters are used, seal all threaded connections with pipe sealant.

8. Open and close the waste drain several times to check the operation. Check for leaks.

Spec Drawings / Parts Explosion
B-3992.pdf

Reviews

Sign Up   for the Air Delights Newsletter

© 1991-2024 • Air Delights, Inc. All rights reserved. "Air Delights" and logo are registered trademarks for Air Delights, Inc.