Login / Register Cart (0)
Customer Reviews
ASI-160

Grab Bar, 24" - Chase Mount

$161.78 / each

Grab Bar, 24" - Chase Mount

American Specialties, Inc. ASI-160

Grab Bar, 24" - Chase Mount

Security Grab Bar (Rear Mounted) shall be fabricated of alloy 18-8 stainless steel, type 304. All exposed surfaces shall have satin finish. Flanges shall be 1/8" (3) thick and shall be completely welded to tube end. Tubing shall be 1-1/2" diameter (38.1) with 18 gauge (0.048" (1.2) thick) wall.

$161.78

ASI-160

Total: $161.78



Secure transaction


Material Safety Data Sheets (MSDS)

More Info

    Stainless Steel Cleaning and Maintenance

    Under normal usage, stainless steel products require regular cleaning with a soft clean rag moistened with a mild detergent followed by a water moistened clean rag and then a dry rag, much the same as stainless steel sinks, pot & pans and eating utensils, and can be wiped with lemon oil applied by soft polishing cloth to maintain sheen.

    Satin finished stainless steel should be protected against Muriatic acid and caustic or abrasive materials, and harsh cleaning detergents [with pH outside the range 6 ± .5]. In the event such agents cause discoloration, polish with a stainless steel cleaner such as 3M Stainless Steel Cleaner & Polish and a 3M Scotch Brite pad. Either a blue (less aggressive) or green (more aggressive) pad is recommended.

Reviews

Sign Up   for the Air Delights Newsletter

© 1991-2024 • Air Delights, Inc. All rights reserved. "Air Delights" and logo are registered trademarks for Air Delights, Inc.