American Specialties, Inc.
Shelf w/Backsplash, 5" x 16"
Surface Mounted Shelf shall be fabricated of alloy 18-8 stainless steel, type 304, 18 gauge; brackets shall be 18 gauge. Shelf shall have a 1" (25mm) hollow pan construction on three (3) sides and raised back splash all from one piece and fully de-burred. All exposed surfaces shall be No 4 satin finish and shall be protected during shipment with a PVC film easily removable after installation.
Downloads: ASI-0694-16 Specification Sheet
Under normal usage, stainless steel products require regular cleaning with a soft clean rag moistened with a mild detergent followed by a water moistened clean rag and then a dry rag, much the same as stainless steel sinks, pot & pans and eating utensils, and can be wiped with lemon oil applied by soft polishing cloth to maintain sheen.
The 9343 #4 satin finished stainless steel should be protected against Muriatic acid and caustic or abrasive materials, and harsh cleaning detergents [with pH outside the range 6 ± .5]. In the event such agents cause discoloration, polish with a stainless steel cleaner such as 3M Stainless Steel Cleaner & Polish and a 3M Scotch Brite pad. Either a blue (less aggressive) or green (more aggressive) pad is recommended.