Wilkins Model 600 & 600XL Water Pressure Reducing Valve with Integral By-pass Check Valve and Strainer

Air Fresheners
Select Aerosol
Microburst 3000
Microburst 9000
AutoMist
Pump Systems
Gel Systems
TCell

Bathroom Products
Automatic Flushers
Automatic Faucets
Manual Faucets
Soap Dispensers
Hand Sanitizers
Hand Dryers
Towel Dispensers
Tissue Dispensers
Napkin Disposal
Shower Heads
Water Heaters
WaterFree Urinals
Flush Valves
Sloan Fixtures
Bobrick Grab Bars
AutoClean / Janitor
Paper Products
Tampon Dispenser
Urinal Screens
Restroom Signs

Repair Parts
Sloan Repair Parts
Flushmate Parts
Zurn Repair Parts
T&S Brass Products

Other Products
Floor Mats
Wilkins Water Control
Watts Water Safety
Zurn Drains
Partitions & Lockers
Wet Floor Signs

Customer Service
Catalog request
Track Your Order
Credit Application
MSDS Information
Company Info
Contact Us
Return Policy
Newsletter

The OneShot Automatic Hand Soap Dispenser

Dispensers & Refills

Xlerator Automatic Hand Dryers

Xlerator Hand Dryers

Fluidmaster PRO45K
Total Tank Repair Kit

Fluidmaster PRO45K

Sloan Valve WaterFree Urinals

Waterfree Urinals

Sloan Valve Flushmate Parts

Flushmate Repair Parts

Home

Contact Us

Catalog Request

Your Cart

Check Out

Wilkins Water Pressure Reducing Valve
with Integral By-pass Check Valve and Strainer

Specification Sheet

Wilkins Model 600 Water Pressure Reducing Valve
with Integral By-pass Check Valve and Strainer

Designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. The integral strainer makes this device most suitable for residential and commercial water systems requiring frequent cleaning because of sediment and debris. The direct acting integral bypass design prevents buildup of excessive system pressure caused by thermal expansion.The balanced piston design enables the regulator to react in a smooth and responsive manner to changes in system flow demand, while at the same time, providing protection from inlet pressure changes.

Stock #	Description	Price	Qty.
34-600	3/4" Water Pressure Reducing Valve	$83.33
1-600	1" Water Pressure Reducing Valve	$121.00
2-600	2" Water Pressure Reducing Valve	$361.08
34-600XL	3/4" Water Pressure Reducing Valve lead free	$98.50
1-600XL	1" Water Pressure Reducing Valve lead free	$142.83
2-600XL	2" Water Pressure Reducing Valve lead free	$426.62
34-600LUSC	3/4" Water Pressure Reducing Valve Less Union, Sealed Cage	$118.10

Specifications

TYPICAL INSTALLATION
Local codes shall govern installation requirements. Unless otherwise specified, the assembly shall be mounted in accordance with the latest edition of the Uniform Plumbing Code. The Model 600 may be installed in any position. If installed in a pit, vault or inside application, specify the "SC" sealed cage option. Multiple installations are recommend for wide demand variations or where the desired pressure reduction is more than 4 to 1 (i.e.: 200 psi inlet reduced to 50 psi outlet). CAUTION: Anytime a reducing valve is adjusted, a pressure gauge must be used downstream to verify correct pressure setting. Do not bottom adjustment bolt on bell housing.

SPECIFICATIONS
The Pressure Reducing Valve shall consist of a bronze body and bell housing, shall have separate access covers for the plunger and strainer screen and shall have a bolt to adjust the downstream pressure. The Pressure Reducing Valve shall be of the balanced piston design and shall reduce pressure in both flow and no-flow conditions. The bronze bell housing and access caps shall be threaded to the body and shall not require the use of ferrous screws. The Pressure Reducing Valve shall be a WILKINS Model 600.

Return to Wilkins Products

Wilkins Water Pressure Reducing Valve with Integral By-pass Check Valve and Strainer

Wilkins Water Pressure Reducing Valve
with Integral By-pass Check Valve and Strainer